Compliance & Certificates
Flue gas analysis is the evidence that an appliance is safe. Gaffer records the full set — CO, CO2, the CO/CO2 ratio, O2, flue and ambient temperature, efficiency and draught — against the appliance and the job, along with the analyser that produced them.
No credit card required · One platform · Web & Android (iOS coming soon)
A reading set per appliance and operating mode, tied to the job and the customer.
CO in ppm, CO2 percentage, the CO/CO2 ratio, O2 percentage, flue and ambient temperature, efficiency and draught — all captured, not just the ratio.
Make, model, type, fuel and operating mode are recorded with the reading, so high and low fire results are distinguishable.
The device vendor and serial are stored with the reading, tying the result to a specific analyser and its calibration record.
Combustion readings sit with your gas safety certificates, calibration records and job history in one platform.
Because the ratio alone does not tell you whether an appliance is efficient or whether the flue is performing. Efficiency, flue temperature and draught are what turn a pass into a diagnosis, and they matter when the same appliance is analysed again next year.
So a reading is traceable to a specific instrument and its calibration record. If an analyser is later found to be out of calibration, you can identify which readings it produced instead of questioning all of them.
Yes. Readings are recorded against the job and appliance and form part of the technical record behind the certificate, rather than being transcribed separately.
Yes. Plant rooms and meter cupboards rarely have signal, so readings are recorded on the device and sync when you are back in coverage.
14 days free. Full access. No card needed.